M280 P2 S90 ← SERVO2_PIN Blue & Red LED: Please check wiring defects with Blue and Red LED( Smart V2. The clock frequency of the Arduino board is 16MHz by default, as shown in the Properties Panel. 0 includes the functions of vagtacho usb 4. For some specific tasks related to CAN-BUS diagnostics or PIN code retrieval you need to use ST-LINK/V2. VNPRO VW Odometer Corretion Tool Support Read Pin Code, CX Code and Key ID For VW. Users are required to authenticate with the new PIN before it becomes active o Launch the RSA app on the iPhone o Enter your PIN number § If you enter the wrong pin, you will still see a Passcode on the next screen, but the OBDAUTO.Enter a PIN – it must be between 6 and 8 numbers (cannot lead with a 0).The 7-digit PIN/SKC (Secret Key Code) dialog is used for Key Matching and Immobilizer 3 Adaptation. It can only be used with Gen 1 (Core) and Gen 2 (Photon, P1, Electron, and E Series) devices, not with Gen 3 devices (Argon, Boron, Xenon). 0) LCD_RW PIN_K4 LCD Read/Write Select, 0 = Write, 1 = Read LCD_EN PIN_K3 LCD Enable LCD_RS PIN_K1 LCD Command/Data Select, 0 = Command, 1 = Data LCD_ON PIN_L4 LCD Power ON/OFF LCD_BLON PIN_K2 LCD Back Light ON/OFF Signal Name FPGA Pin No.